Working at Heights — Prevention and Vigilance Refresher Training Course
$27.50 inc. GST
This refresher course reinforces the core principles of working safely at heights, with a strong emphasis on prevention-first thinking and safe set-up. It revisits how to apply the hierarchy of control in practical situations, how to reduce fall exposure before relying on PPE, and how to carry out effective equipment inspections and anchor selection. The course also covers how to recognise changing environmental conditions and make confident stop-work decisions.
Designed for experienced workers who already hold a working at heights competency, this course helps learners reset their mindset and sharpen their decision-making. Complacency, shortcut behaviours, and personal responsibility are examined directly — because experience does not remove risk. On successful completion, participants receive an instant digital certificate confirming their refresher training.
This course will take approximately 50 minutes to complete.
Why is the Working at Heights — Prevention and Vigilance Refresher Training Important?
Falls from height remain one of the most serious workplace risks globally. Even relatively low heights can result in significant injury or fatal outcomes, particularly when combined with hard surfaces, structural hazards, or changing environmental conditions. Incidents often occur not because workers lack foundational training, but because familiarity with a task quietly erodes active thinking and procedural discipline over time.
This refresher addresses that gap directly. By revisiting elimination and engineering controls, equipment inspection habits, and the decision to stop work when conditions change, experienced workers are better positioned to challenge unsafe practices before an incident occurs. This course directly supports a prevention-first approach to working at heights — reducing exposure through active thinking rather than reactive response.
Who Should Complete This Course
- Frontline workers who already hold appropriate working at heights training and competency, and who require a refresher on key safe-work principles
- Supervisors or managers responsible for overseeing teams who regularly perform work at height
- Contractors and site staff who need documented evidence of ongoing refresher training for their organisation or site
- Any worker seeking to strengthen their prevention mindset and reinforce safe decision-making at heights
Topics Covered
- Reframing the risk – why prevention still matters
- Applying the hierarchy of control
- Safe set-up and equipment vigilance
- Personal responsibility and staying alert
Course Experience
This course is fully online and accessible anytime from any location with internet access — no scheduling or travel required. Learning is interactive and scenario-based, placing learners in realistic working-at-heights situations that require active decision-making rather than passive reading.
The course is self-paced, so participants can pause and resume at any time to suit shift patterns or site schedules. An assessment of 8 questions is included, with 100% correct answers required to pass. On successful completion, an instant digital certificate is issued, providing immediate proof of refresher training for personal records, site inductions, or organisational compliance files.
The course meets WCAG 2.1 Level AA accessibility standards and is suitable for workers across a wide range of literacy levels and learning backgrounds.
Assessment
Yes, an assessment of 8 questions is included, with 100% correct answers required to pass.
Related Courses
- WHS Fundamentals for Employees – AU Model Laws Training Course (AUS Version)
- WHS Fundamentals for Managers – AU Model Laws Training Course (AUS Version)
- Workplace Health and Safety Fundamentals Training Course (NZ Version)
- Manual Handling Safety Training Course (AUS Version)
- Manual Handling Safety Training Course (NZ Version)
- Managing Slip and Trip Hazards Training Course (AUS Version)
- General Evacuation Training Course (AUS Version)
- Warden Training 1: Emergency Preparation Training Course
- Working in Confined Spaces: Control and Vigilance Refresher Training Course
- Unsafe Acts and Safety Behaviours: Industrial Training Course (AUS Version)
Learning Outcomes
By completing this course, learners will be able to:
- Identify situations where the hierarchy of control has not been correctly applied to working at heights tasks
- Apply prevention-first thinking to planning and set-up decisions before work at height begins
- Demonstrate how to carry out effective equipment inspections and select appropriate anchor points
- Recognise the environmental and situational triggers that require a stop-work decision
- Describe how complacency and routine contribute to fall risk, and explain the role of personal responsibility in maintaining safe practices
Organisational Benefits
- Provides documented evidence of ongoing refresher training for workers who hold existing heights competency — supporting audit readiness and compliance records
- Reduces the risk of incidents caused by complacency or shortcut behaviours in experienced workers
- Reinforces a prevention-first safety culture across teams and sites where working at height is routine
- Supports supervisors and managers in demonstrating a proactive, structured approach to ongoing safety obligations
- Delivers instant certification on completion, making it easy to track and report refresher training across the workforce
| Platforms | Desktop, laptop, tablet or mobile (widescreen) |
| Browsers | Chrome, Edge, Firefox and Safari are supported (typically versions from 2019 onwards). IE11 is not supported |
| Hosting | Enrol in Tribal Habits portal |
| Accessible | Yes, meets WCAG 2.2 guidelines at a Level AA standard – More info on WCAG 2.2 here |
Description
Why is the Working at Heights — Prevention and Vigilance Refresher Training Important?
Falls from height remain one of the most serious workplace risks globally. Even relatively low heights can result in significant injury or fatal outcomes, particularly when combined with hard surfaces, structural hazards, or changing environmental conditions. Incidents often occur not because workers lack foundational training, but because familiarity with a task quietly erodes active thinking and procedural discipline over time.
This refresher addresses that gap directly. By revisiting elimination and engineering controls, equipment inspection habits, and the decision to stop work when conditions change, experienced workers are better positioned to challenge unsafe practices before an incident occurs. This course directly supports a prevention-first approach to working at heights — reducing exposure through active thinking rather than reactive response.
Who Should Complete This Course
- Frontline workers who already hold appropriate working at heights training and competency, and who require a refresher on key safe-work principles
- Supervisors or managers responsible for overseeing teams who regularly perform work at height
- Contractors and site staff who need documented evidence of ongoing refresher training for their organisation or site
- Any worker seeking to strengthen their prevention mindset and reinforce safe decision-making at heights
Topics Covered
Topics Covered
- Reframing the risk – why prevention still matters
- Applying the hierarchy of control
- Safe set-up and equipment vigilance
- Personal responsibility and staying alert
Experience
Course Experience
This course is fully online and accessible anytime from any location with internet access — no scheduling or travel required. Learning is interactive and scenario-based, placing learners in realistic working-at-heights situations that require active decision-making rather than passive reading.
The course is self-paced, so participants can pause and resume at any time to suit shift patterns or site schedules. An assessment of 8 questions is included, with 100% correct answers required to pass. On successful completion, an instant digital certificate is issued, providing immediate proof of refresher training for personal records, site inductions, or organisational compliance files.
The course meets WCAG 2.1 Level AA accessibility standards and is suitable for workers across a wide range of literacy levels and learning backgrounds.
Assessment
Yes, an assessment of 8 questions is included, with 100% correct answers required to pass.
Related Courses
- WHS Fundamentals for Employees – AU Model Laws Training Course (AUS Version)
- WHS Fundamentals for Managers – AU Model Laws Training Course (AUS Version)
- Workplace Health and Safety Fundamentals Training Course (NZ Version)
- Manual Handling Safety Training Course (AUS Version)
- Manual Handling Safety Training Course (NZ Version)
- Managing Slip and Trip Hazards Training Course (AUS Version)
- General Evacuation Training Course (AUS Version)
- Warden Training 1: Emergency Preparation Training Course
- Working in Confined Spaces: Control and Vigilance Refresher Training Course
- Unsafe Acts and Safety Behaviours: Industrial Training Course (AUS Version)
Outcomes
Learning Outcomes
By completing this course, learners will be able to:
- Identify situations where the hierarchy of control has not been correctly applied to working at heights tasks
- Apply prevention-first thinking to planning and set-up decisions before work at height begins
- Demonstrate how to carry out effective equipment inspections and select appropriate anchor points
- Recognise the environmental and situational triggers that require a stop-work decision
- Describe how complacency and routine contribute to fall risk, and explain the role of personal responsibility in maintaining safe practices
Organisational Benefits
- Provides documented evidence of ongoing refresher training for workers who hold existing heights competency — supporting audit readiness and compliance records
- Reduces the risk of incidents caused by complacency or shortcut behaviours in experienced workers
- Reinforces a prevention-first safety culture across teams and sites where working at height is routine
- Supports supervisors and managers in demonstrating a proactive, structured approach to ongoing safety obligations
- Delivers instant certification on completion, making it easy to track and report refresher training across the workforce
Accessibility
| Platforms | Desktop, laptop, tablet or mobile (widescreen) |
| Browsers | Chrome, Edge, Firefox and Safari are supported (typically versions from 2019 onwards). IE11 is not supported |
| Hosting | Enrol in Tribal Habits portal |
| Accessible | Yes, meets WCAG 2.2 guidelines at a Level AA standard – More info on WCAG 2.2 here |